Industry Info

Notes on the operation of organic fertilizer dryer in fertilizer production line

2024/04/30
The npk fertilizer production line mainly includes feeder, disc mixer, chain crusher, double roller granulator, drum dryer, drum cooler, drum screener, finished product warehouse, automatic packaging machine, etc. Similarly, organic Fertilizer production lines also need dryers, why use dryers?

The organic fertilizer dryer is a kind of drying equipment that processes a large amount of organic materials. High output performance is one of the concerns of users. With the advocacy of the national energy saving and environmental protection concept in recent years, the organic fertilizer dryer equipment is now in the process of ensuring efficiency and production. At the same time, more and more attention is paid to the improvement of energy saving direction, and reducing heat loss is one of the most important links. Pay attention to heat loss when the organic fertilizer dryer is running. The fan system is a link that cannot be ignored. In order to make the organic fertilizer dryer run smoothly and normally, the fan should pay attention to the following maintenance during the normal operation.
    Maintenance method of organic fertilizer dryer fan:
    1. Always observe the operation of the fan. If the flow is too large and does not meet the requirements for use, or if you need to study abroad in a short time, you can use the throttling device to adjust.
    2. Regularly check the sensitivity of the thermometer and oil gauge, and control the bearing mailbox within the specified range.
    3. When the fan of the organic fertilizer dryer is running, if there is any abnormality, it should be checked immediately.
    The maintenance method of the fan of the organic fertilizer dryer.
    4. For the faults found in the inspection, the cause should be found out, and the small and rough goods should be dealt with immediately. If the transfer cannot be eliminated, when the goods find a major fault, the maintenance should be stopped immediately.
    5. In addition to each overhaul, the lubricating oil should also be replaced on time.
    6. Check the E-type rotary bearing seat on time, clean and supplement the lubrication and the reason to prevent the bearing from burning out.