The fully hydraulic track type tipping and throwing machine adopts hydraulic track walking, which is controlled by one person. Rubber blocks are added to reduce the damage of the track to the ground and increase the stability of the vehicle. The walking vehicle rides on the strip pile, forming a new strip pile after the vehicle passes. The fully hydraulic tracked tipping and throwing machine is used for field operations. In the later stage of material fermentation, it also has a crushing function. The overall structure is just right, with safe and reliable performance.

The working principle of a fully hydraulic tracked tipping and throwing machine:

Using a diesel engine as the power source, the movement is transmitted through hydraulic transmission, and the material is stirred using welded alloy sheets. The operation of the fully hydraulic tracked tipping and throwing machine is controlled by personnel.

The performance characteristics of the fully hydraulic tracked tipping and throwing machine are significant compared to other similar products:

Reasonable structure: The fully hydraulic tracked tipping and throwing machine adopts a straddle structure, which forms a new strip pile after operation without the need for reshaping. The overall structural rigidity is good, the force is balanced, easy to operate, and has strong adaptability to the site. The components are mostly standard parts, making it easy to use and maintain.

The multifunctional hydraulic track flipping equipment is widely used:

The multifunctional hydraulic track flipping equipment is suitable for the fermentation process of microbial fermentation of livestock manure into fertilizer. It is suitable for the fermentation of sludge, contaminated soil, and garbage compost, and effectively prevents the generation of various harmful odorous gases during the fermentation process. The installation of the working drum is suitable for both sticky and powdery materials, with balanced power: low energy consumption and large output! Eliminating infrastructure projects for higher cost-effectiveness!

Application range of multifunctional hydraulic track flipping equipment:

The work site should be flat and solid, and there should be no concave or convex surfaces greater than 30mm in the working area.

2. Strip stacking: The width cannot be too wide, and the height can be appropriately increased within 100mm, with no length limit.

3. Leave no less than 10 meters of empty space at both ends of the material pile for easy turning, with a distance of more than 1 meter between the material piles.

4. The multifunctional hydraulic track tipping device is only a feasible walking type tipping machine and cannot be used as a walking vehicle or a load-bearing vehicle.