As a new type of mechanical equipment, the organic fertilizer production line is currently very popular. Its development in recent years has been recognized and favored by everyone. The reason is that it conforms to the trend of the times, responds to national policies, and has received strong subsidies and promotion from the country. Therefore, it is well-known to the people of the whole country. The future development of organic fertilizer production lines is still relatively optimistic. This has greatly stimulated the rapid rise of organic fertilizer production line manufacturers and can also bring high economic benefits to our country. 

1, first of all, we need to pay attention to some important parts of organic fertilizer production line equipment. For example, the bearing of the crusher bears most of the load of the machine, which will directly affect the service life and operation rate of the machine, so it is necessary to regularly lubricate, the injected lubricating oil must be clean, and the seal must be good. Among them, the main places of oil injection are: rolling bearings, rolling bearings, all gears, active bearings, sliding surfaces, etc.

2. Next, pay attention to whether the other parts of the organic fertilizer equipment work normally, and check the degree of wear of the vulnerable parts, and replace them in time when they need to be replaced. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it. If the rotating gear has impact sound, it should be stopped immediately to check and eliminate.

3, among them, the newly installed tires are easy to loose, and the operator must check frequently. At the same time, dust and other objects on the bottom plane of the movable device should be removed to prevent the machine from moving the movable bearing on the bottom frame when it encounters materials that are not easy to break, causing serious accidents.