The vertical crusher for organic fertilizer production crushing equipment is an optimized design based on advanced domestic and foreign crushing equipment, which is a non sieve and adjustable crushing equipment. It can be widely used as one of the equipment for organic fertilizer crushing.

The vertical crusher for organic fertilizer production uses a high-strength wear-resistant hard alloy chain with synchronous speed during the crushing process, suitable for crushing raw materials and return materials. Especially for materials with high moisture content, they have strong adaptability and should not be blocked. The material is discharged smoothly. The material enters from the feeding port and collides with the high-speed rotating chain inside the casing. After the impact, the material is squeezed and crushed, and then collides with the inner wall of the casing before colliding with the chain again. During the falling process, it undergoes several impacts and turns into powder or particles below 3mm, which are discharged from the bottom.

The vertical crusher for organic fertilizer production is driven by an electric motor to rotate the main shaft. The main shaft has two bearing seats, upper and lower, which are installed at the upper and lower ends of the casing. The casing assembly is installed on the lower frame, with a rotor disc and chain installed on the main shaft. The feeding hopper is located on the upper part of the casing. For the convenience of loading and unloading the hammer head, a flap is opened on the casing for easy disassembly and maintenance

Characteristics of vertical crusher for organic fertilizer production crushing equipment:

1. Especially for materials with high moisture content, it has strong adaptability, is not easy to block, and has smooth feeding.

2. The crushing blade is made of special materials and has a service life three times longer than similar products.

3. The crusher has high crushing efficiency and is equipped with an observation window. It can be completed in ten minutes by replacing vulnerable parts.