Stacking composting process of the biofetilizer project: The materials with the proper moisture content are layered into a stack according to a certain height and height. The stacks are arranged in parallel on the open-air or indoor flat compost yard. The most efficient professional stacker rides continuous turning operations across the stockpile. The shape of the cross section of the stack is quasi-semicircle 2 to 3 meters wide and 0.8 to 1.5 meters high, the length is unlimited.



Features of this process: Mechanical maneuvering has strong maneuverability, and the use of bar stacking is conducive to water loss in the later stage of composting. It has low requirements on civil construction and does not require supporting fermentation tanks. It can be stacked outdoors to save construction investment. Larger; outdoor compost in the northern region has poor thermal insulation in winter, and the compost cycle needs to be extended; in the open season, the compost pile is susceptible to impact in the rainy season, and it is recommended to cover the shelter with conditions.

The working principle and operation method of crawler compost turner machine: It is mainly driven by diesel engine, the crawler travels, and the flip wheel is placed on the trapezoidal frame. When the driver drives the compost turner machine into the pile body, the hydraulically driven dumping wheel rotates at high speed to continuously pick up the material and toss it to the rear, and the material is put back into the pile. The stacker has a high degree of maneuverability and flexibility, which can save the composting workshop area, reduce the civil construction investment, and reduce the construction cost of the fermentation bin by at least 1/3. When it is dumped, it is scattered at a high level and has sufficient contact with air, easy to reduce moisture. The throwing wheel is equipped with a wear-resistant curved tooth knife, which has a strong ability to crush the material when taking the material and the material in the stack is dropped by the throwing wheel to lengthen the movement path of the material and make full contact with the air. It also facilitates the evaporation of water and promotes the rapid completion of aerobic fermentation. It is very suitable for large-volume, humid climate, and continuous fermentation occasions.